Specifications:
Drive mode Constant
Driving voltage 12V
Lamp beads Model SMD2835
Emitting Color R / G / B / Y / W
Light bar power 0.54W / Group 3 Light / group
1 meter power 10.8W
Operating current 45mA / Group 3 Light / group
Operating temperature -20 +60
Lamp beads 60 lights / m
Lamp beads center spacing 16.7mm
Board Size 6mm × 5M / Article 8mm × 5M
Life 50000h
Waterproof level is not waterproof
Light bar brightness (LM) 16LM / Lamp
Beam angle 140-160
Color Temperature (White) 13000K / 6500K / 4500K / 3200K optional
1 S soft light strip at the bend, not close to the lamp beads and a resistive element, otherwise it will damage the circuit, bending, try to stay away from elements 3-4mm
2 S soft lights not in a repeated bending, otherwise it will lead to the circuit board foil fracture
3 fixed lights with time, avoid glue (502), hot-melt adhesives and other substances exposure lamp beads lamp beads caused by corrosion
4 installation lights, avoid folding (such as forceps), and other hard objects to scratch lamp beads
5 Use lights when not once removed from the reel too long and stacked together, or prone to distortion and tie, resulting in damage to the lamp beads install Chela
7 LED lights most of the low pressure, so remember when installed, to better match the corresponding lights transformer, so as not to impact damage lights;
8, the installation of LED soft light, LED light source and a resistor to avoid light bar is located in the bend, so light and resistance sealing off, resulting in some light can not light;
9, installation, tear-sided adhesive on the back of the product to the place of use; cause brightness is not enough;
10, when used, do not connect more than three meters length, in order to avoid brownouts guide
11 When installation, tear-sided adhesive 3M genuine back of the product can use the site, convenient and reliable.